Bitrex Fit Test Solution – 2 x Bottles

1 x Sensitivity Solution 55ml
1 x Fit Test Solution 55ml

The Bitrex Fit Test Solution is used to test the respirator wearer to a bitter solution. It is used with the 3M™ Qualitative Face Fit Testing Kit.

Test kits and accessories designed to help your organisation meet mandatory fit testing of respirators for compliance. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter. 3M™ offers two Qualitative Fit Test Apparatus Kits FT-10 (Sweet) and FT-30 (Bitter). FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol. FT-30 uses a test solution of denatonium benzoate to produce a very bitter taste. The choice between the bitter and sweet fit test kit is a personal one. However, a small percentage of the population is unable to detect saccharin in which case the bitter test must be used.

• A replacement part for 3M™ Qualitative Face Fit Testing Kit
• Used to fit test 3M™ Disposable and Reusable Half Face respirators

Shelf Life / Storage

Bitrex Fit Test Solution is without a shelf life, however upon opening the bottles the customer is to annotate each bottle with the date opened, followed by a 12 month later date – which will be the expiry.

Store in a cool, dry environment – away from sunlight.

MATERIAL SAFETY DATA SHEET – JSP Bitrex – Sensitivity Solution

MATERIAL SAFETY DATA SHEET – JSP Bitrex – Test Solution

Watch how to use our Fit Test Solution here.

‍