P3RC Particle Filter
The P3RC filter shown in the picture is particle filter which will be attached to the STS gas filter when used as combined filter.
The combined filter will prevent from both gases and particles.
P3RC Particle Filter can only be used when attaching to the STS gas filter, and used as combined filter.
- Filter media with water repellent treatment.
- Super thin: Dia. +4mm, Height +14.5mm when attached to the gas filter.
- Class P3
- Compatible with FS01 / CF01 / RS01S / RS01 Masks.
STS – Shigematsu Particle Filter P3RC (Pair)
The STS – Shigematsu Particle Filter shown in the picture is a high-performance, particle filter which will be attached to the STS gas filter when used as a combined filter. Furthermore, created for ideal use with STS Shigematsu half and full-face non-powered respirators. The combined filter will prevent both gases and particles.
P3RC Particle Filter can only be used when attaching to the STS gas filter and used as a combined filter.
These particulate filters filter out 99.95% of particulates using mechanical filtration that doesn’t lose filtration efficiency as it gets full or wet. These handy filters are water and oil-repellent, with a hard casing that protects filter material from damage.
Features:
- Filter media with water-repellent treatment.
- Super thin: Dia. +4mm, Height +14.5mm when attached to the gas filter.
- Class P3
- Compatible with FS01 / CF01 / RS01S / RS01 Masks.
Typical industrial applications:
- Construction
- Stonemasonry
- Manufacture of drugs and chemicals
- Agriculture
- Wood industry
- Foundries
BRAND STS – Shigematsu
STANDARD EN 143:2000
WEIGHT <20g
PACKAGING Pair
Conformity
EU Type Examination Certificate
As Safer is one of the only accredited Fit2Fit providers in Sussex as listed on the fit2fit Register, get your STS respirator fit tested by us.
